DJI NAZA-M NAZA V2 Multirotpr Contrôleur de Vol + GPS V2 + PMU + LED Plein Combo E

Contrôleur de vol DJI NAZA-M NAZA V2 Multirotpr + GPS V2 + PMU + ensemble combiné complet LED

Quoi de neuf avec le NAZA-M V2 :

Nouvel algorithme de stabilisation d'attitude, offre de meilleures performances de vol / maniabilité.

Nouvelle performance de contrôle de vol, offre une meilleure expérience de vol ; (le contrôle de vol est plus fluide, le décollage est plus facile).

Prise en charge d'Octorator.

Un moteur arrêté peut encore atterrir en toute sécurité (Hexarotor, Octorotor)

Compensation automatique de l'écart de cap, réduit les effets des perturbations magnétiques ; interférence autour de la détection et de l'avertissement de la boussole.

L'étalonnage avancé de l'IMU, l'identification et l'avertissement des erreurs ont été ajoutés, réduisant l'impact de l'erreur du capteur sur les performances de vol.

Veuillez noter que les propriétaires existants de Naza V1 pourront passer aux fonctionnalités de la V2 avec un nouveau PMU qui sera disponible en tant que mise à niveau.

DJI a continué à améliorer le contrôleur de vol Naza, le dernier en date est le Naza M V2 qui est le prochain produit passionnant sur le marché avec la dernière technologie intégrée au nouveau NAZA M V2. La fonctionnalité de base restera la même que DJI NAZA V1, mais il y a quelques nouvelles fonctionnalités.

La structure matérielle du contrôleur principal a été optimisée et l'extensibilité et les performances du système de contrôle de vol ont été encore améliorées avec de nouveaux algorithmes de stabilisation d'attitude, ceux-ci offrent de meilleures performances de vol / maniabilité et un nouveau niveau de performances de contrôle de vol qui offre une meilleure expérience de vol ; (le contrôle de vol est plus fluide, le décollage est plus facile). Le Naza M V2 prend en charge OctoCopter et dispose de la fonction de sécurité supplémentaire sur HexaCopter et OctoCopter si un moteur cesse de fonctionner, il peut toujours être atterri en toute sécurité.

Le Naza M V2 a une compensation automatique de l'écart de cap, cela réduit les effets des perturbations magnétiques et des interférences autour de la boussole, il y a un avertissement sur la détection des perturbations magnétiques. L'étalonnage avancé de l'IMU ; l'identification et l'avertissement des erreurs réduisent l'impact des erreurs de capteur en vol, augmentant ainsi les performances globales.

L'unité GPS ajoutée au Naza M V2 verra une excellente tenue de position et des fonctionnalités RTL pour plus de sécurité. Le V2 NAZA avec l'unité GPS aura IOC pour aider les pilotes débutants et expérimentés à tirer le meilleur parti de leurs systèmes avec une aide à l'orientation facile tout en volant à de plus grandes distances.

Le forfait comprend :

1 contrôleur de vol Naza-M V2

1 module GPS Naza-m V2

1 module de gestion de l'alimentation

1 x LED avec interface USD

Câbles

All-in-one Design             DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.
Independent PMU with amazing function extension             The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)
Advanced & Improved Attitude Stabilization Algorithm             The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.
Nine Types of Multi-rotors Supported             Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.               Quad I, Quad X;               Hexa I, Hexa V, Hexa Y, Hexa IY;               Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.
Multiple Flight Control Modes/Intelligent Switching             It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.
GPS Module Available/Accurate Position Hold             The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.
Intelligent Orientation Control Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:  In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1) In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2)
Enhanced Failsafe Mode             If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.
Two Levels of Low Voltage Protections             In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.
Motor Arm and Motor Dis-arm                     There are four ways to start the motors, see the following picture:         When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.     Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.       Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.
PPM, S-BUS & Ordinary Receiver Supported             Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.
Independent LED Module The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.
Built-in Gimbal Stabilization Function The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.
Multi-rotor One-power Output Fail Protection In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.
Remote Gain Adjustment The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.
New Assistant  Firmware Online Update The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.